Sonatest Sitescan 123W 2016-12-06T11:48:59+00:00

Sonatest Sitescan 123W Ultrasonic Flaw Detector

This is a Sonatest Sitescan Flaqw Detector, available for hire / rental today!
Hire Now
  • Calibration

  • Repair

  • Supply

  • Accessories

Brochure
Operator Manual
Test Range 0-5mm (0.2in) up to 0-10000 (400in) at steel velocity. Variable in sequence, 10mm or 1mm
Velocity 1000 – 9999 m/s
Probe Zero 0 – 999.999 us
Delay 0 – 10000m at steel velocity in 0.05 steps (0 – 400 in 0.002 in steps)
Gain 0 – 110dB in 0.5, 1, 2, 6, 10, 14, 20 dB steps
Test Modes Pulse echo and transmit-receive
Gates Start & width adjustable over full range Amplitude 0-100%, 0.5% steps Visual & audible alarms Single gate positive trigger
Measurement Modes Depth: Depth and amplitude of signal in gate
  Trig: Trigonometric display of beam path, depth and surface distance Calculation of skip depth and curve surface compensation,  X-offset for transducer
  T-Min: Holds minimum thickness in depth mode
Pulser Voltage -200 volt peak amplitude, rise/fall time
Pulser Width Fixed 100ns 30 – 250 ns linked to filter band
Pulser Repetition Frequency (PRF) Selectable 5  – 1000Hz.
Display Colour transflective TFT Display area 111.4 x 83.5mm (4.39 x 3.29 in) A-scan area 315 x 200 max Variable brightness Sunlight viewable 8 Selectable colour schemes for A-scan & menu
Screen Update Rate 50 or 60Hz
Rectification Full Wave Full Wave, positive, negative, RF
Frequency Band Broadband 1 – 10 Mhz (-6dB)
Vertical Linearity 1% full screen height
Amplifier Linearity +- 0.1 dB