GE Inspection USM35 X 2016-12-06T11:53:40+00:00

GE Inspection USM35X Ultrasonic Flaw Detector

This is a GE Inspection USM35X ultrasonic flaw detector, available for hire / rental from VARE.
Hire Now
  • Calibration

  • Repair

  • Supply

  • Accessories

Brochure
Operator Manual
Calibration Ranges Min.: 0 to 0.5 mm +10 % (steel),   0 to 0.02” +10 % (steel)

Max.: 0 to 9,999 mm +10 % (steel),   0 to 390” +10 % (steel) within  the frequency range from 0.2   to 1 MHz / 0.5 to 4 MHz  0 to 1,420 mm +10% (steel),

0 to 56” +10 % (steel) within   the frequency range from 0.8    to 8 MHz / 2 to 20 MHz

Velocity 1,000 to 15,000 m/s, 40 to 600 inch/ms variable in steps of 1 m/s, 0.1 inch/ms and fixed programmed values
Display Delay From -10 to 1,000 mm, -0.3 to 40” (340 µs)
Probe Delay 0 to 200 µs
Auto Cal Measurement and setting of sound velocity and probe delay using two known calibration echoes (2-point calibration)
Pulse Intensity 220 pF, 1 nF
Damping 50 ohms, 500 ohms (1,000 ohms in TR mode)
PRF 4 to 1,000 Hz, variable in 10 steps
Frequency Ranges 0.2 to 1 MHz / 0.5 to 4 MHz / 0.8 to 8 MHz /  2 to 20 MH
Gain 0 to 110 dB, variable in steps
Gain Steps 0.5 / 1 / 2 / 6 / 12 dB (or user-adjustable), step 0 is locked
Fine Gain 4 dB, continuously variable in 40 steps
Rectification Full-wave, negative and positive half-wave, RF mode
Reject Linear, 0 to 80 % screen height Variable in steps of 1 %
Gates 2 independent gates
Display 116 mm x 87 mm, 4.6″ x 3.4″ (W x H) 320 x 240 pixels
A Scan Size 116 mm x 80 mm, 4.6” x 3.2” 320 x 220 pixels (zoom)
Units mm, inch
Probe Connectors Lemo (BNC adaptors available upon request)
Battery Li-ion battery or 6 C-cells (NiCad, NiMH or AlMn), operating time: 14 hours with Li-ion battery  (6.6 Ah), approx. 3 hours with NiMH cells (3 Ah), battery charge check by an icon in the measurement line
Size 177 mm x 255 mm x 100 mm,  7.0″ x 10″ x 3.9″ (H x W x D)
Weight 2.2 kg, 4.9 lbs., including batteries